Brush Cutter-Closed Front
The Blue Diamond® Mini Skid Steer Series 2 Brush Cutter follows on the heels of its big brother, our extreme duty brush cutter! Using the same robust direct drive system, this brush cutter has raised the bar in the performance of brush cutters used on machines with limited hydraulic flow as low as 9 GPM. This unit will work with flow up to 20 GPM.
- Available in 36”, 42”, or 50” widths
- 3 blades
- 4” cutting capacity
- Direct Drive with lifetime warranty on the spindle
- Minimum required flow: 9 GPM
- Double edged blades
- Bidirectional
Call on pricing, multiple options
Brush Cutter-Open Front
The Blue Diamond® Mini Skid Steer Series 2 Brush Cutters work great in grass and heavy brush up to 4″ diameter! This attachment’s 3 blades with bi-directional cutting and its brutally strong direct drive make this tough brush cutter a front runner in its class. The open front design allows a good bite at the base of trees and shrubs.
- 3 blades
- 4″ cutting capacity
- Direct drive with lifetime warranty on the spindle
- Bi-directional cutting
- Double edged blades
- Minimum required flow: 9 GPM
- Open front design for more aggressive cutting
Call on pricing, multiple options
Grapple Bucket
Blue Diamond® offers the Mini-Series Grapple both in a root grapple and a grapple bucket designed for mini skid steers. These exceptionally tough grapples originated through a need for a tough yet light grapple for interior demolition. This very demanding application gives this grapple an opportunity to make a name for itself as the top in its class. Industrial grade components, from the pivot pins to the cylinders, make this attachment ready for the most demanding conditions.
- 1” pivot pins in bushings
- Welded cylinder with 2” bore
- Protected cylinder and lines
- Available from 36” to 50” wide
- Bolt-on edge included with grapple bucket
Call on pricing, multiple options
Grapple Rake
The Blue Diamond® Mini Grapple Rake for mini skid steers is a great tool for ripping up roots, pushing them into a pile, and then grabbing that exact pile of roots. It also can be used in other applications for brush or small logs. The independently acting top clamps allow you to grab loads that are not even on both sides. The bottom tines have serrated teeth to easily rip and tear out roots when raking through the dirt.
- Greaseable pivot points
- Independent dual top clamps
- 9″ tine spacing
- Mounts available to fit most machines
- Opens to 32.5″, closes to 5.75″
- Hoses and couplers included
Call on pricing, multiple options
Root Grapple
Blue Diamond® offers the Mini Series Root Grapple for your mini skid steer needs. These exceptionally tough grapples originated through a need for a tough yet light grapple for interior demolition. This very demanding
application gave this grapple an opportunity to make a name for itself as the top in its class. Industrial grade components, from the pivot pins to the cylinders, make this attachment ready for the most demanding conditions.
- 1” pivot pins in bushings
- Welded cylinder with 2″ bore
- Protected cylinder and lines
- Available from 36″ to 59″ wide
- Bolt-on edge included with grapple bucket
Call on pricing, multiple options
Hydraulic Breaker
Our 10 year quest to develop a superior hydraulic breaker for mini skid steers is now available from Blue Diamond®. This “hammer” design offers technology, simplicity, reliability, ease of setup, and service support. No more downtime, get started on your demolition, construction, and quarry jobs now.
- 3-year warranty
- Mono-block design / no tie rods
- Anti-blank firing system hydraulic brake
- No re-gassing needed
- Only 2 internal moving parts
- 2 speed control / variable stroke
- Quiet operation
- Self-regulating
- Body bushings around piston
Call on pricing, multiple options
Trencher
The challenge with a trencher on a mini skid steer is that the limited flow range affects the performance. By using the planetary drive offered by Blue Diamond®, torque and durability are both improved substantially.
- Extended auger
- Self-adjusting crumber
- Adjustable foot to keep the trench depth consistent
- Eaton drive motor
Call on pricing, multiple options
Auger Drive
Blue Diamond® Attachments is known for its reliability and quality especially in our auger drives! Our Mini Auger exceeds all industry standards with a 4-year warranty! Available to fit most mini skid steer and compact track loaders. Rental Recommended.
- Planetary drive
- 2” hex shaft
- Double swing action
- 4-year warranty
Call on pricing, multiple options
Rototiller
This Blue Diamond® Mini Rototiller for mini skid steers uses all the same components as our full size unit. The 315cc specially designed motor has built in over-sized nose cone bearings for long life! The bi-directional operation is accomplished with swinging tines that rotate to maximum performance angle in either direction.
- 6″ tilling depth
- Available in 48″ and 56″
- 1-year warranty
- 12 GPM minimum flow required
- Mounts available to fit most mini machines
Call on pricing, multiple options
Power Rake
This lighter unit is suited to smaller frame skid steers and walk behind machines. The bolt-on mount allows greater flexibility for rental companies and dealers to have the correct model for the right machine, with mounts offered for mini and full size skid steer machines.
- Flip up wheels
- No-flat airless wheels
- Drum width 48″, 60″ and 72″
- 5/8″ greaseable axles on wheels
- 7″ diameter drum with 1.5″ teeth
- Overall width 12″ more than drum width
- 1.25″ spindles with adjustable height
- Bolt-on mount (can be switched for a different mini or full size skid steer mount)
- Spindles on drum are 1 3/8″ diameter greaseable bearings
- Fixed carbide teeth
- Available with manual or hydraulic angle
Call on pricing, multiple options
Pallet Forks
The Blue Diamond® Mini Pallet Forks for mini skid steer and mini track loaders offer great visibility without sacrificing durability. These tough mini pallet forks use a Class 2 fork tine hung on a machined carriage bar that allows the tines to be locked in various positions. Rental Recommended.
- Non-floating tines are hooked in, top and bottom
- Durable backrest for tough working conditions
- Fork tines lock in multiple positions
- Mini pallet fork tines are available from 36″ to 48″ long
- 1-year warranty
Call on pricing, multiple options
Buckets
Blue Diamond® Mini Buckets come with either a 15” or 20” back height. Constructed sturdier than most OEM buckets, these durable buckets are built for the long haul when paired with your mini skid steer! They are available in smooth and tooth, and a bolt-on edge is an available option for extra protection against wear and tear. Standard widths are from 36” to 60” wide with a bottom length of 25″ deep. Each bucket comes standard with a D-ring. Rental Recommended.
- Bottom length depth of 25”
- Constructed of 3/16” A36 steel
- Available with smooth or tooth edge
- 15” or 20” tall
- Comes standard with D-ring
- Optional bolt-on cutting edge (for smooth)
- Mounts available to fit most mini skid steers
Call on pricing, multiple options